Pharmaceutical Testing – Hinotek

BJ-2 Disintegration Tester

BJ series of instruments are used for detecting disintegration of solid in prescriptive conditions.

Applicable standards:

There are twelve tubes in two basket assembly.
Each test station is driven independently. Auto stop at timing point.
The bath liquid can achieve an even temperature.
A MPU is used to automatically control the temperature, time and frequency of nacelle back and forth.
Timing at will. The present and real time data can be displayed alternately in time.
Automation: auto-test, auto-diagnose, auto-alarm.

RC series of instruments are used for detecting velocity and extent of pharmic dissolution from the tablet, capsule etc in prescriptive menstruum.

Applicable standards:

It has eight vessels and eight poles, with four vessels and four poles in front and other at back.
The head moves up/down automatically.
The basket units and paddle units are made of imported stainless steel (SUS316L).
The magnetism-pumped circular water current can heat the system evenly, and the bath liquid can achieve an equal temperature.
A MPU is used in dissolution tester to automatically control the temperature, rotational speed and time, and the parameters can be preset at any time.
It can be operated conveniently by keystroke. The measurement result is displayed by LED. The preset and real data can be displayed alternately in time.
Automation: auto-test, auto-diagnose, auto-alarm.
It can test by self and alarm automatically. The dissolution parameters of’ Chinese Codex 2010′ are stored in and can be taken out at any time.
Time can be preset at many points. The beeper sounds automatically to any point, and then the tester automatically runs to the next one.

CS series of instruments are used for detecting friability/ abrasion of tablet.

Applicable standards:

Two drums run synchronously. Auto stop at timing point.
The drum is made of high-quality hyaline acryl.
The speed and revolution of the drum are constant, either preset or real data is displayed on the LED.
A MPU is used to control all operations, high accuracy is achieved in testing rotary speed and circle number.
Automation: auto-test, auto-diagnose, auto-alarm.

Tablet hardness testers are instruments for detecting breaking hardness of tablet.

Applicable standards:

The tablet is loaded artificially and pressed automatically.
There is high accuracy press sensor and hardness data is displayed on LED.
It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
Time of testing will be saved by directly measuring the diameter.
Test data is displayed and locked automatically, so can test be reset and cycled.
It can deal with and print out such data as hardness of each tablet, the maximum value, the minimum value, the average value and the number of tablets.
The parameters can be preset at any time. Either preset or real data is displayed on the LED.
Automation: auto-test, auto-diagnose, auto-alarm.